Dimensions: 4.65 x 4.15 x 2.25 in. (118 x 105 x 57 mm) with knobs

Current Draw: 460 mA

Input Impedance: 1 M

Output Impedance: 100

S/N Ratio: 115dB typical

24-bit 96kHz A/D & D/A converters

All analog dry signal path

All digital wet signal path with 20Hz 20kHz frequency response

Flexi-Switch Technology

This device features Flexi-Switch Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

• For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

• For momentary operation, hold the footswitch down for as long as youd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

Power

• For best results, please use the included 9v center-negative 1-amp DC power supply.

• To use with multiple output transformer-balanced isolated pedal-specific power supplies, Pyramids may be powered from two outlets combined using a current-doubling cable. DO NOT USE A VOLTAGE-DOUBLING CABLE BECAUSE THAT WILL SEND 18V TO PYRAMIDS AND FRY IT LIKE AN OVEREASY EGG AT A GREAZY SPOON DINER.