Restore optimal airflow and odour control to your Incinolet with this Blower Wheel Replacement Kit. The blower wheel (impeller) is critical for drawing fresh air into the chamber and exhausting moist air out, supporting complete incineration and reducing odours. For correct fit, verify your toilet’s serial number on the data plate at the back, top-right of the unit and include it with your order to ensure the right part.   

Compatible with the following serial numbers:

36071-39999

40000-49999

50000-59999

60000-99999

Key Features

Restores proper airflow to support efficient burns and better odor control during and after cycles. 

OEM-spec blower wheel — manufacturer advises providing your serial number to confirm the correct match. 

Designed for easy maintenance: wheel can be removed, cleaned with hot soapy water or a degreaser, and reinstalled. 

Set-screw hub installation (1/8” Allen) for a secure fit on the motor shaft. 

Quiets vibration caused by a corroded or out-of-balance wheel; replace when cleaning no longer resolves noise. 

Compatibility

Works with Incinolet models within the serial ranges listed above; blower wheel is used across both 120V and 240V Incinolet units (part reference WHE002 in the official parts list). Always confirm via your serial tag. 

What’s Included

1 × Incinolet blower wheel (impeller) with hub set screw

Installation overview (refer to the owner’s manual for full procedures and safety). 

Installation & Care (Quick Tips)

Unplug the unit and remove the top.

Loosen the hub set screw (1/8” Allen), slide off the old wheel, clean the housing, and install the new wheel.

Clean the blower wheel/housing every 3–6 months to reduce noise and vibration. Do not get the motor wet. 

Specs

Part Reference: WHE002 (manufacturer parts list designation) 

FAQs

How do I know this will fit my Incinolet?

Check the serial number on the data plate (back, top-right) and include it with your order so the correct wheel is confirmed. 

My unit is noisy or vibrating, will this help?

Yes. The manual recommends cleaning or replacing the blower wheel if noise or vibration persists due to corrosion or imbalance. 

How do I maintain the blower wheel?

Clean the wheel and housing every 3–6 months with hot soapy water or a degreasing cleaner; avoid wetting the motor.