Bolin Technology D220 FHD 1080p60 Dante AV 20x PTZ Camera

Bolin D Series Dante AV PTZ camera D220 is the world's first Dante AV hardware enabled pan, tilt, zoom camera interfacing video and audio in a standard 1 Gbps network, and providing uncompromised video quality with lowest latency and synchronization.

The D Series Dante AV camera provides high quality color image up to 4K60 / Full HD, with quiet and smooth Pan, Tilt and Zoom capability.

It is a great video device that is fully compatible with Dante system for Dante audio devices to work with.

Powered By DanteAV Module
Designed to seamlessly integrate into an existing Dante audio ecosystem, the D412 PTZ is managed using the Dante Controller Software with flexibility to independently route audio and video with sub-microsecond accuracy to minimize time alignment issues.

Key Features

• Individually route video using familiar Dante Controller software, with no need for breakouts or matrix switches to display the camera video on any number of Dante AV-enabled screens.
• Deliver IP streaming video to Dante network and local HDMI 2.0 video output to conventional workflow in 4K60 or FHD.
• Point to Multipoint and Point to Point Distribution - supports both unicast and multicast video distribution.
• HDMI embedded high-quality audio and DanteAV video streaming embedded audio with support for mic and line-in audio input.
• Extremely quiet and smooth operation for Pan/Tilt movements combined with enhanced adaptive, variable, and super slow speed control provides accurate and effective operation experiences. Picture Profile Preset- Image parameter setting restore with presets and quick access operation.

Technical Specifications

Image Sensor
Sony IMX 307, 1/2.8" CMOS
Pixels
1920x1080, 2 MP
Zoom
Optical Zoom 20X, Digital Zoom 2x
Focal Length
5.2~98mm, F1.5 ~ F3.0
Aperture
F1.5(W)~F3.0(T)
Horizontal Angle of View
55.8 Degrees (W)~3.2 Degrees (T)
Min. Object Distance
1000mm (Wide), 1500mm (Tele)
Min. Illumination
0.5Lux (Day), 0.1Lux (Night)
Shutter Speed
1/1s~1/10000s
Focus
Auto, Manual, One Push
White Balance
AUTO, ATW, Indoor, Outdoor, USER, OPW
Exposure
Full Auto, Manual, Shutter Priority, Iris Priority, Bright
Image Adjustment
Brightness, Color (Saturation), Contrast, Sharpness, HUE
Back Light
On/Off
Flip
On/Off
WDR
On/Off, Level 1-6
Mirror
Horizontal
Gamma
5 Steps
Noise Reduction
2D/3D
S/N Ratio
=50db
OSD
Editable
Video Format - HDMI 2.0 -D220
1920x1080p:60/59.94/50/30/29.97/25; 1280x720p:60/59.94/50/30/25
Color Format
HDMI, RGB 8bit 4:4:4 / YUV 12bit 4:2:2
Color Space
YUV(YCbCr), RGB
Dante AV
Powered by DanteAV Module
Network Interface
Standard 1Gbps Ethernet
Video Codec
ProAV optimized implementation of JPEG2000 codec in FPGA, Licensed By IntoPIX
Video Transport Format
Dante Video over IP
DanteAV IP Video Format
1920x1080p:60/59.94/50/30/29.97/25; 1280x720p:60/59.94/50/30/25
Video Streaming
Unicast or Multicast
Latency - Codec
Encoder to Decoder < 8ms with Low Latency Mode
Bandwidth
500-600Mbps at 4Kp60 10 bit 4:2:2; 150-250Mbps at 1080p60 10 bit 4:2:2
Control Protocol
Visca serial control over IP (Visca RS422), Visca-Over-IP
Video Output
HDMI 2.0X1, IP (Dante AV)
IP Video Stream
Up to 4K/60 and 1080p60
Camera Control Interface
RJ45X2-RS232/RS422, RJ45X1-IP Control, IR Remote Control
Control Protocol
VISCA. Serial Over IP (Dante AV), VISCA Over IP, PELCO_D, PELCO_P
LAN Port
RJ45X1(1000BASE-T Ethernet port)
Synchronization
Internal synchronization
Tally Light
Tally lamp in front, Red Color
Dip Switch
Back Panel: 8 PIN x 1 for system setting; Video Resolution Dip X1 for video format setting
Firmware Upgrade 1
Dante AV system upgrade via FUM; Back panel USB2.0 Type-A: Camera MCU firmware upgrade via USB
IR ID
ID selector for IR controller, total 3
Power Connector Type
IEC60130-10 (JEITA standard RC-5320A) TYPE4; RJ45: PoE++ (IEEE802.3bt)
Audio Input
MIC/LINE input: 3.5 mm stereo mini jack, Input impedance: High impedance During MIC input, Supported mic
Stereo mic (plug-in power) Supply voltage: 2.5 V ± 0.5 V During LINE input Input level: Approx. -10 dBV ±3 dBV
Audio Output
Embedded with HDMI, 24bIt'stereo, Embedded with DanteAV IP signal. Sample rate: 44k1 to 192k, PCM24
Operating Temperature
32 to 104 Degrees F
Operating Humidity
=80% Suitable for Use
Power Input
12VDC, POE++, IEEE802.3bt Type 4 Class 6
Power Consumption
Min: 33W; Max: 37W
Heat Dissipation
Cooling fan speed adjustable, 3 Level
Acoustic Noise
NC35 or less
Mount
Ceiling mount, Wall mount, Tripod
Size of Tripod Screw Thread
1/4-20UNC x2, 3/8
Dimension
272 x 156.6 x 206.1mm
Weight
2.8kg
Body Color
Metallic Gray
Gross Weight (Approximate)
12LBS
Item Includes
1x Dante AV Camera
1x Power Adaptor
3x Power Cord
1x IR Controller
1x RJ45 to RS232 Control Cable
1x RJ45 to RS422 Control Cable
1x Safety Hook
1x HDMI Cable Mount
3x M4 Screws
2x M2 Screws