TASKI Jontec 300 Neutral Floor Cleaner is a low foaming neutral cleaner for all water-resistant hard floors.
Can be used for both manual and machine applications.

Benefits
• Safe to use on all water resistant floors
• No grey or “greasy” floors
• Good degreasing properties at minimum dosage to save costs and minimise the impact to the environment
• Fast drying time without streaks Use instructions TASKI Jontec 300 Pur-Eco is supplied in SmartDose dosing system for convenient and controlled dosing of the product into a bucket or machine tank.

Dosage:
Bucket & Single Disc application: Start filling bucket / tank with water. Turn yellow head to bucket position: pull head up, then push down fully. Dose 1x20ml per 10L water (0.2%).
Scrubber Drier application: Start filling machine tank with water. Turn yellow head to machine position: pull head up, then push down fully. Dose 1x40ml per 20L water (0.2%) into the machine tank.
Proper dosage and temperature save costs and minimize environmental impacts.

Application:
1. Bucket cleaning: Apply the solution with a mop. Allow to act. If required scrub. Remove the soiled solution.
2. Machine cleaning - direct method: Apply the solution to the floor, scrub with pads or brushes and remove the soiled solution.
3. Machine cleaning - indirect method / heavy soil: Apply solution with scrubbing action and squeegee blade up, allow contact time before scrubbing for a second time with squeegee blade down to remove the solution. Rinse with clean water if necessary