Need ball joints installed? Read below on the description of which type of ball joints are offered with these arms and then Choose from the drop down menu above.

More Stability and Better Rides


Your KRX is rugged and it’s built for off-road. If you want it to truly handle everything you encounter, you need to upgrade to SuperATV’s High-Clearance 1.5” Forward Offset A-Arms for the KRX or KRX4 1000. They’re stronger, come with full camber adjustment, and increase your wheelbase by 1.5 inches for more stability and room for up to 36” tires. It’s a win-win.

Bigger Tires and Better Clearance

The 1.5” forward offset gives you better tire clearance and room for up to 36” tires—all without a lift! A longer wheelbase also makes you more stable over hills and large obstacles. They make use of our unique dual-bend design to raise the profile of these arms so they won’t get hung up on rocks and other trail obstacles.

Superb Strength

Our beefed up 1.25” diameter tubing is 25% larger than stock and results in much stronger control arms. Ride hard and get wild. We want you to test the limits and ride with confidence. With the strongest suspension you can get, nothing will stop you.

Plus, they’re backed by a lifetime warranty.

Adjustable Pivot Blocks

You get full adjustability thanks to our adjustable pivot blocks. They come set to stock specifications right out of the box, so you don’t have to mess with them if you don’t want to. But they let you tweak your camber to perfection if you bog down your suspension with a bunch of cab weight or add a small camber-crippling lift. You can dial it in so you don’t get any premature tire wear but you do get a better ride.

FEATURES

1.5” forward offset

Fit up to a 36” tire

Made with 1.25” diameter steel tubing

High-clearance bends give you extra ground clearance without a lift

Adjustable pivot blocks for full camber adjustability

Built-in steering stops

UV-resistant powder coat finish

Backed by a lifetime warranty

NOTE: Bushings and sleeves are not provided in this kit

BALL JOINTS INFORMATION:
The above drop down menu purchase includes 4 balljoints.

We only offer with Keller Ball Joints

Keller Ball Joints Are Tough

When it comes down to it, you won’t find better than Keller Ball Joints. They’re just designed better than OEM. The ultra-strong threaded chromoly housing eliminates the OEM snap ring and makes them virtually impossible to pull out. Prepare your Kawasaki KRX 1000 for the worst with the best ball joints available.

• Two-piece, threaded design eliminates snap ring
• Chromoly steel construction
• Easy to install and maintain
• Backed by a lifetime warranty

Designed for Maximum Strength

Todd Keller has probably broken more ball joints than any man living—all that in the quest to build the strongest ball joint possible. His innovative threaded ball joints are the best that money can buy. One side presses in and the other threads on, locking to your A-arm like a nut and bolt. With no snap ring, pulling out on accident is virtually impossible.

Made with 4340 Hardened Chromoly Steel

Keller Ball Joints are built to handle hard rides and unpredictable terrain. That’s all thanks to the hardened chromoly steel housings and studs. Plus, they’re greaseable and adjustable for superior longevity.

Two-Part Design and a Lifetime Warranty

Keller’s superior two-piece design is just as easy to install as stock. And to top it all off, Keller Ball Joints are backed with a lifetime warranty. Upgrade your KRX ASAP!